MyEnergi - Harvi Energy Harvesting Wireless Sensor CE-HARVI-65A3P

CE-HARVI-65A3P
About harvi
Harvi is a clever little device that enables the zappi and eddi products to be installed without using a wired current transformer (CT) for measuring the grid and or generation power; instead the CT is connected to harvi. No power source is needed for harvi – the energy from the CT is harvested and used to transmit the measurement signal to the zappi or eddi. This means batteries or electrical wiring are eliminated!
 
Features
Wireless power sensor
Energy harvesting – no batteries or electrical wiring required
 
Uses standard CTs supplied with eddi & zappi products
 
3 CT inputs for 3-phase supplies
Grid / Generation / Storage measurement configurable
Fast & accurate measurement
Wall mountable
Please note* harvi doesn’t come with it’s own CT
 
Specification / Details
CT Inputs / 3 inputs enable 3-phase or multi-point power measurement Measurement Range / 25W to 15kW (50Hz AC, import and export) Energy Harvesting Range / 0.2A to 65A (including reactive current)
Accuracy / 2.5% typical Transmission Rate / 1s @ 1A+, <10s @ 0.5-1A, <30s @ <0.5A Wireless Interface / 868 MHz (proprietary protocol)
Mounting Location / Indoor only (can be housed in an IP rated plastic box if required)
Operating Temperature -30°C to +50°C Dimensions - 86 x 86 x 25.5mm
 
https://www.youtube.com/watch?v=7U9f4v1OAsw&t=458s
The little box that makes EV CHARGER INSTALLATION EASIER - MYENERGI HARVI